Product introduction
盤管式熱交換器主要適用于純蒸汽的冷凝，通過對蒸汽冷凝水的取樣檢測判斷純蒸汽的品質；
產品構造簡潔，、便于安裝。
The coil heat exchanger is mainly suitable for the condensation of pure steam, and the quality of the pure steam is judged by sampling and detecting the steam condensed water;
The product structure is simple, no dead ends, easy to install.
產品特點
Product features
外管304材質不銹鋼，亞光表面，美觀易清潔;
The shell is made of 304 stainless steel.
純蒸汽接觸采用316L材質不銹鋼;
The product contact surface is made of 316L stainless steel.
內部分流結構，增強了換熱效果;
There is a segment structure inside to increase heat exchange efficiency.
內盤管一次成型，無任何焊接，確保耐壓并符合衛生要求。
The internal tube is formed in one time without welding. It guarantees pressure-resisting performance
ａnd comply with the requirements of clean.
水冷型
Water cooling Serial
采用管套管的形式，內管通蒸汽，外管通冷卻循環水。
lt employs the tube in tube mode, with steam in tube while cooling water in shell.
氣冷型
Air cooling serial
采用壓縮空氣吹冷;
Adopt pressure air to cool pure steam.
減少成本支出。
Reduce cost.
工藝模塊系列-純蒸汽取樣器
Process module series-Pure steam sampler
純蒸汽滅菌作為無菌制劑最重要的滅菌方式之一，其本身的無菌質量
保障尤為關鍵，“柏康”純蒸汽取樣器采用盤管式換熱器為其提供冷凝功
效，交換成冷凝水，并檢測其是否符合注射用水（WFI）水質標準，以判
斷滅菌的符合性。
Pure steam sterilization is one of the most important sterilization methods for aseptic preparations. Its own aseptic quality assurance is especially important. The “Bakang” pure steam sampler uses a coil heat exchanger to provide condensation and exchange into Condensate and test for compliance with water quality standards for water for injection (WFI) to determine compliance with sterilization.
采購中心
